YOU ARE AT THE USA WEBSITE. SWITCH TO: | INTERNATIONAL | NETHERLANDS |  
   
 
 
   
     
 


 

 



Karat® AutoSpeed™

Automatic Downfeed Unit for Karat®300
Core Drilling Systems.

Features

  • For blind and conduit holes
  • Bit Capacity: 3/8" to 12"
  • Blind holes with depth input up to 80"
  • Continuous optimal downfeed speed due to intelligent processor
  • Auto touch and start function
  • Auto shut down and retract after reaching set depth or going through
  • In case of lock up of bit: auto stop, partial retrack and auto restart.

Photo left: AutoSpeed™ mounted on Karat® 300 Core Drilling Unit

 

 

Motor*
• Power: [W/HP] 60/0.08
• Voltage: [V] 115
• Frequency: [Hz] 60
Dimensions:  
(L x W x H): [Inch] 4½" x 8½" x 19"
Weight:  
Overall: [lbs] 18.7
IP Class: 55
Safety Class (EN-IEC 61029): I
* Other voltages and frequencies available upon request.

Karat AutoSpeed
Part Nr. 2.000.497
EAN: 8714345214894
 
       
       
 
 

What's in the Box

  • AutoSpeed Unit
  • Carrying Case
  • Allen key 5 mm
  • Hexagon socket bolt M6 x 90
  • AutoSpeed shaft with keyway
  • Allen key 8 mm
  • Hex bolt M10 x 40 for slide 300
  • Bushing 32 mm for slide 300
  • Locking pin with washer
  • Operating Manual


 
       
 
 
 

Logo B+BTec

   
Contact General Products
Munterij 8 Privacy & Cookie Statement Core Drilling
4762 AH Zevenbergen On-Site with B+BTec Structural Anchoring
  Website B+BTec International Concrete Cutting
The Netherlands Website B+BTec Netherlands Hammer Drilling
    Tile & Stone
T +31 168 331 260    
F +31 168 331 280   Folow us on:
E info@bbtectools.com
   
© Copyright 2010-2020 B+BTec. All Rights Reserved. B+BTec, Karat & Diamond3 are Registered Trademarks.